Publikace vydané v posledních
pěti letech
Bartoň,
S., Křivánek, I.: Růstová křivka modelovaná
dvojicí exponenciálních funkcí, řešení v Maple.,
Research in Agricultural Engineering,
Vol 46, No 3, ISSN 1212-9151, Praha 2000
Bartoň,
S.: Quick algoritms for calculation of coefficients
od non-linear and partially continuous functions
using the least square method, solution in Maple
6., WCNA2000, Vol7, ISSN –0362-546X,
Pergamon Press 2001
Buchar,
J., Rolc, S. : The use of strain rate
testing to study of turbine missile impact.
Journal de Physique VII, 1999,175 - 180.
Buchar,
J., Forejt, M., Jopek, M., Křivánek,
I.: Evaluation of constitutive relations for
high strain rate behaviour using the Taylor
test, J-PhysIV France,2000, No 10, p.75-90.
Buchar,
J., Křivánek, I., Horáček, P.: REFLECTION
OF STRESS PULSE AT THE INTERFACE BETWEEN ELASTIC
BAR AND WOOD BLOCK. Drevárenský výzkum. 2000,
No 45(3), p.35-46.
Buchar,
J., Rolc, S.: The strain rate dependence
of the spall strength. Journal de Physique
VII, (1999) 951 - 958.
Buchar,
J., Forejt, M., Jopek, M., Křivánek,
I. : Evaluation of constitutive relations for
high strain rate behaviour using the Taylor
Test. J.Phys.IV France 10, 2000), 75
- 80.
Buchar,
J., Rolc, S., Hrubý, V. : On the explosive
welding of a ring to the axisymmetric body.
Journal of Material Processing Technology
85, 1999,171 - 174
Buchar,
J., Severa, L., Havlíček, M., Rolc, S.
: Response of wood to the explosive loading.
J.Phys.IV France 10, 2000, 529 - 534.
Máchal
L., Křivánek I.: Indicators of Semen
Quality of Roosters of Three Parental Layer
Lines and Specific Conductivity of the Semen,
ACTA VET.BRNO, 2002,No71, p.109-116.
Řezáč,
P., Křivánek, I., Poschl, M.: Changes
of vaginal and vestibular impedance in dairy
goats during the estrous cycle, , Small Ruminant
Research,2001, No42, p.185-190.
Řezáč,
P., Poschl, M., Křivánek, I.: Effect
of probe location on changes in vaginal eletrical
impedance during the porcine estrous cycle,
Theriogenology,2003,No 59, p. 1325-1334.
Řimovsky, K., Bauer, F., Bohaček. Z., LinhartovÁ, M., Toul, J.: Vliv hnojení kejdou prasat
na biodegradaci ropných produktů v půdě.
Rostlinná výroba, 44, 1998, (7), s. 325-330
, ISSN 0370-663X
Švejcar,
J., Krejčí, J., Buchar,.J., Brezina,
J.:Damage in Metals caused by High-Strain-Rate
Loading,Kovove materialy,37,1999,c.5,str.349-356
Augustin, M., Ščerbejová, M.: Anticorrosive efficiency
of preservants for farming machinery.
Research Agriceltural
Engineering. 49, 2003 s. 22-26, ISSN 1212-9121,
záměr MSM 432100001
Bartoň,
S., Křivánek, I.: Růstová křivka modelovaná
dvojicí exponenciálních funkcí, řešení v Maple,.RES.AGR.ENG.,2000,No
46,p.112-120.
Bauer, F., Sedlák, P.: Problematika zatížení hnacích kol
traktoru při orbě, Agriculture (Polnohospodárstvo),
Bratislava, 49, 2003, (3), s.122-129, ISSN 0551-3677
Bauer, F., Sedlák, P.: Vliv připojení nesených pluhů na
zatížení hnacích kol traktoru., Acta univ.
agric.et silvic. Mendel.Brun. (Brno), LI,
2003, (3),s.193-204 ISSN 1211-8516.
Bauer, F., Sedlák, P.: Vliv zatížení hnacích kol na tahové
vlastnosti traktoru, Res. Agr. Eng.,
46, 2000, (1), s. 11-15, ISSN 1212-9151.
Bauer, F., Šupčík, J., Letocha, L.: Usage of VUT IX model
of radiation density gauge in making maps of
soil consolidation, Acta univ. agric.et silvic.
Mendel.Brun. (Brno), LI, 2003, (1), s. 41
- 48, ISSN 1211-8516.
Bauer,F.,
Sedlák, P.: Vliv zatížení spalovacího
motoru na ekonomiku provozu traktorových souprav.
Acta univ. agric.et silvic. Mendel.Brun.
(Brno), přijato do tisku, viz potvrzení redakce.
Buchar
J., Křivánek I., S.Gajdůšek, DYNAMIC
PENETRATION USED TO STUDY OF RHEOLOGICAL PROPERTIES
OF CHEESE, ACTA UNIVERSITATIS ET SILVICULTURAE
MENDELIANAE BRUNENSIS, 2000,No 1,p. 61-68.
Buchar,
J., Adamík, V., Severa, L., Havlíček,
M.: Dynamic three point bending of the notched
spruce beams. Acta Universitatis Agriculturae
et Silverculturae Mendelinae Brunensis,XLIX
(2001),83-90.
Buchar,
J., Adamík, V., Severa, L., Havlíček,
M.: Impact of the wood rod on the rigid anvil
– theory and experiment. Acta Universitatis
Agriculturae et Silverculturae Mendelinae brunensis,XLIX
(2001),101-109.
Buchar,
J., Adamík, V., Severa, L.: Behaviour
of wood under extremaly high strain rates. Acta
Universitatis Agriculturae et Silverculturae
Mendelinae Brunensis,IL (2001),77-87.
Buchar,
J., Gajdůšek, S.: Stress wave propagation
in EDAM cheese. Acta Universitatis Agriculturae
et Silverculturae Mendelinae Brunensis,IL
(2001),57-69.
Buchar,
J., Krejčí, J., Forejt, M.: Response
of Concrete to The Impact of Fragment Simulating
projectiles.Engineering Mechanics 8(2001),pp.63
–69. ISSN 1210- 2717.
Buchar, J., Křivánek, I., Gajdůšek, S.:
Dynamic penetration used to study of rheological
properties of cheese. ACTA universitatis
agriculturae et silviculturae Mendelianae Brunensis.
Vol. XLVIII (2000),61-68.
Buchar,
J., Křivánek, I., Horáček, P.: Reflection
of stress pulse at the interface between elastic
bar and wood block.Wood Research,45 (2000),
35 – 46, ISSN 0012-6136.
Buchar,
J., Kubiš, I., Gajdůšek, S., Křivánek,
I..: Influence of Cheese Ripening on the Viscoelastic
Behaviour of Edam Cheese, Czech J.Food Sci.,2001,Vol
19,No1,p.1-7.
Buchar,
J., Severa, L., Havlíček, M.: The response
of wood plates to high velocity impact. Acta
Universitatis Agriculturae et Silverculturae
Mendelianae Brunensis, XLVII,No1,1999,31-37.
Buchar,
J., Simeonová, J., Křivánek, I.: Squeezing
Flow of Soft and Semiliquid Food, ACTA UNIVERSITATIS
ET SILVICULTURAE MENDELIANAE BRUNENSIS, 2003,No3,
p. 75-87.
Buchar,J.,
Adamík, V., Severa, L., Havlíček, M.:
Behaviour of the Spruce Beam under explosive
Loading. Acta Universitatis Agriculturae
et Silverculturae Mendelinae Brunensis,XLIX
(2001),91-99.
Buchar,J.,
Kubiš, I., Gajdůšek, S., Křivánek, I.
:Influence of Cheese Ripening on the Viscoelastic
Behaviour of Edam Cheese. Czech Journal of
FOOD SCIENCES, 19(2001), pp.1-7.ISSN 1212-1800.
Černý,
M., Filípek, J.: Exploatace šroubů z korozivzdorných
ocelí. Acta univ. agric. et silvic. Mend.
Brunensis p. 125-132, L, 2002, 4. ISSN 1211
– 8516.
Černý,
M., Filípek, J.: Synergie korozního působení
a defektů ve svarech na jejich pevnost. Acta
univ.agric.et silvic.Mendel.Brun., 2003.
Černý,
M., Mazal, P., Šuba, V.: Method of Acoustic
Emission and Possibilities of Corrosion Detection
Degradation, Journal of Acoustic Emission
(Los Angeles), Vo17, No 3/4, 2000, p. 20-28,
ISSN 0730 – 0050.
Černý,
M.: Korozní exploatace vybraných spojovacích
materiálů. (The corrosion damage of fastening
materials.) Acta univ. agric. et silvic.
Mendel. Brun., XVLI, No. 4, p. 1-6, ISNN
1211 – 8516.
Červinka.
J. Bartoň. S.: Study kinematics of an
agrikutural machine by the Maple program In.
IX. International symposium ekological aspects
of mechanization of plant producioin, Waršava,
2002, s.83-89., ISBN 83-86 264 – 76-4
Fajman,M.,Ondráček,J.:
A proposal for evaluating the operating state
of agricultural tractors. Research in Agricultural
Engineering. Zemědělská technika, Praha
2001, str. 27-32. ISSN 1212-9151.
Fajman,M.,Ondráček,J.:
Practical experience in using biodegradable
fillings in Zetor tractors. Zemědělská technika,
č.45, Praha 1999 (4), str.155-158. CS ISSN
0044-3883.
Filípek,
J., Černý, M., Jandák, J.: Abrasive wear
of head – treatet steel under soil conditions.
Research in Agricultural Engineering 46. Zemědělská
technika, 2000(1), p. 1-5.
Filípek,
J., Černý, M.: Vliv tepelného zpracování
oceli na opotřebení volnými a vázanými abrazivními
částicemi. Acta univ. agric. et silvic. Mend.
Brun. p. 91-97, L, 2002, 3. ISSN 1211 –
8516.
Filípek,
J.: Vertikální strukturní diagramy binárních
kovových soustav. Acta universitatis agriculturae
et silviculturaeMedelianae Brunensis, s.
117 – 122, LI, 2003, 4 ISSN 1211-8516.
Forejt,
M., Krejčí, J., Jopek, M., Buchar, J., Pernica,
Z.: Dynamic models of forming materials. Acta
Mechanica Slovaca Volume 1, Ročník 6.Číslo
2.pp 21 – 26,2002. ISSN 1335 – 2393
Forejt,
M., Krejčí, J., Jopek, M., Buchar, J., Pernica,
Z.: Dynamic models of forming materials. Acta
Mechanica Slovaca Volume 1, Ročník 6.Číslo
2.pp 21 – 26,2002. ISSN 1335 – 2393.
Hrouz
J., Bartoň S., Gotthardová J.: Application
of parameters of growth curve when estimating
value of beef cattle. 51st Annual Meeting
of the European Association for Animal Production,
Hague, 2000 :
Jurečková,
M., Ščerbejová, M.: Test Results of Paiting
Systems Designed fr Rusted Surfaces. Acta
technologica agriculturae.6,2003 s.36-38,ISSN
1335-2555, záměr MSM 432100001
Křivánek,
I., Buchar, J.: Deformace a lom dřeva
při rázovém zatěžování, monografie MZLU,2001.
Kubiš,
I., Křivánek, I., Gajdůšek, S., The Relationships
between the Chemical,Dieletric and Sensory Properties
of Edam Cheese during Ripening, Czech J.Food
Sci.,2001,Vol 19,No3,p. 85-89.
Letocha, L., Bauer, F., Šupčík, J.: Measuring bulk density of
soil by absorption ionisation gamma radiation.
Acta univ. agric.et silvic. Mendel.Brun.
(Brno), IL, 2001, (5), s. 109 - 120, ISSN 1211-8516.
Máchal,
L., Křivánek, I.: DIELEKTRICKÉ VLASTNOSTI
EJAKULÁTU A SEMENNÉ PLAZMY BÝKŮ, Máchal L.,
Křivánek I., ACTA UNIVERSITATIS ET SILVICULTURAE
MENDELIANAE BRUNENSIS,2000, No 1,p. 7-13.
Máchal,
L., Křivánek, I., Klupczynski, J.: The
Conductivity of the Bulls Ejaculate in Correlation
with the Qualitative Parameters of the Ejaculate
and the Concetration of Cu, Ca and P in Seminal
Plazma, POLISH JOURNAL OF NATURAL SCIENCES,
2002,No10(1), p.123-132.
Máchal,
L., Křivánek, I.: The Specific Conductivity
of the Stallion Ejaculate and Semen Plazma,
ACTA UNIVERSITATIS ET SILVICULTURAE MENDELIANAE
BRUNENSIS,2002, No5, p.45-51.
Pícka,
J., Filípek, J.: Polní zkouška abrazivního
opotřebení návarů a ocelí.. Acta universitatis
agriculturae et silviculturae Medelianae Brunensis,
s. 161 – 165, LI, 2003, 5 ISSN 1211-8516
Sedláčková,
M., Buchar, J., Gajdůšek, S.: The influence
of the cooling rate on the rheological properties
of the Javor processed cheese. Acta Universitatis
Agriculturae et Silviculturae Mendelianae Brunessis
L(2002),pp.75 – 83
Sedlák, P, Bauer, F.: Výsledky měření tahových vlastností
traktoru na válcovém dynamometru a v polních
podmínkách., Acta technologica agriculturae,
Nitra, 6, 2003, (1), s. 17- 20, ISSN 1335-2555
Sedlák, P., Bauer, F., Vávra, V.: Vliv naostření čepelí
na vybrané parametry orební soupravy, Acta
univ. agric.et silvic. Mendel.Brun. (Brno),
XLVVIII, 2000, No3, s.37-44, ISSN 1211-8516.
Sedlák, P., Bauer, F.: Měření energetické náročnosti rotačního
žacího stroje s kondicionerem, Zemědělská
Technika, 45, 1999, (4), s.133 - 137, ISSN
0044-3883.
Sedlák, P., Bauer, F.: Vliv otupení čepelí na energetickou
náročnost orby, Zemědělská Technika,
44, 1998, (4), s. 127-133, CS ISSN 0044-3883.
Sedlák,
P., Bauer,F.: Vliv styčné plochy pneumatik
na tahové vlastnosti traktoru. Acta univ.
agric.et silvic. Mendel.Brun. (Brno), přijato
do tisku, viz potvrzení redakce.
Sedlák, P., Bauer. Neischl, A.: Control of the guality
of operation of idustrial fertilizer spreaders
in the systém of „precision farming“. Res.
Agr. Eng., 47, 2001, (2), s.49-54, ISSN
1212-9151.
Severa,
L., Křivánek, I., Buchar, J., Havlíček,
M., ON THE INFLUENCE OF WOOD ANISOTROPY ON ITS
IMPACT BENDING STRENGTH, ACTA UNIVERSITATIS
ET SILVICULTURAE MENDELIANAE BRUNENSIS,
2000,No 3,p. 45-52.
Severa,
L., Buchar, J., Koňas P., Křivánek, I.:
The Tensile Test of Notched Spurce Wood Specimens
and its Numerical Simulation, ACTA UNIVERSITATIS
ET SILVICULTURAE MENDELIANAE BRUNENSIS,
2003, No4, p.39-46.
Severa,
L., Buchar, J., Vlach, B., Havlíček,
M.: Behaviour of wood under dynamic three point
bending. Acta Universitatis Agriculturae
et Silverculturae Mendelianae Brunensis,
XLVII,No,3,1999, 27 – 32.
Severa,
L., Buchar, J.: Methods of quantitative
fractography usable for evaluation of fracture
surface of wood. Wood Research,45(4)
(2000), 9 – 18 (vyšlo letos, vloni neuvedeno)
ISSN 0012-6136.
Severa, L., Křivánek, I., Buchar, J., Havlíček, M.: On the influence of wood anisotropy
on its impact bending strength. ACTA universitatis
agriculturae et silviculturae Mendelianae Brunensis.
Vol. XLVIII (2000), 42-52.
Simeonovová,
J., Buchar, J.: Egg behaviour under low
velocity impact. Acta Universitatis Agriculturae
et Silverculturae Mendelinae Brunensis,IL
(2001), 89 – 100.
Smrž,
J., Havlíček, M., Buchar, J.: The behaviour
of wood plates under ballistic impact. Acta
Universitatis Agriculturae et Silviculturae
Mendelianae Brunessis L(2002),pp.97 – 106.
Stejskal,B.,Chrást,V.:
Comparison of cutting lubricants used for the
grinding process. Acta technologica agriculturae.
3, 2003 s.65-67,ISSN 1335-2555. Záměr MSM 432100001
Strnadel,
B., Severa, L., Němec, O., Buchar, J.:
On the use of fractal analysis in description
of fracture surface of wood. Acta Universitatis
Agriculturae et Silverculturae Mendelinae Brunensis,IL
(2001),25-31.
Štursa, V., Bauer, F.: Vliv pneumatik na pracovní vlastnosti
traktorových souprav., Res. Agr. Eng.,
46, 2000, (2), s.47 - 52, ISSN 1212-9151.